BISSELL Proheat 2X Revolution Carpet Cleaner

Additional information

Product Notes

• Specifically designed to deeply wash and clean your carpets, lifting away spots and stains gently
• TurboStrength™ Motor Technology. Gives you a quiet, energy-efficient clean with 40% more suction power and 50% noise reduction.
• 3 Modes of Cleaning. Max Clean Mode, Deep Clean Mode and Express Clean Mode.
• Custom Cleaning allows you to chose the correct mode for the cleaning tasks
• Delivering Powerful and a Quiet Clean with Energy-Efficient Motor.
• Heatwave Technology maintains water temperature as you clean
• Max Clean Mode: Removes embedded dirt, stains and allergens.
• Deep Clean Mode: Eliminate More Than 90% of Odour-Causing Bacteria
• Express Clean Mode: Carpets dry in about 30 minutes.
• Dual DirtLifter® Powerbrushes includes 12 rows of cleaning bristles remove embedded dirt.
• Remove Tough, Ground-in Dirt & Stains
• Low Profile Foot makes manoeuvring around and under furniture easy.
• Two Tank System: Two separate tanks for clean and dirty water.
• Removable tanks for easy filling and emptying.
• Always clean with fresh water and formula.
• Powerful Surround Suction providing a 1 hour drying time
• Removable front nozzle and 8cm tough stain brush & hose attachment included

Product Care

• Refer to the User Guide & Safety Instructions Included
• Maintenance: Cleaning Machine After Use: Unplug from electrical socket when not in use and before cleaning, maintaining or servicing the appliance. First, fill the clean water tank with warm tap water and then empty it all to rinse. Then fill again with warm tap water and return the tank to the machine. Twist cap back on tightly. To flush and rinse machine: Turn the machine on and press the spray trigger for 15 seconds while making back and forth passes on a section of carpet. Release the spray trigger and suck up the water. See page 11 to clean the water that was just sucked up from the dirty tank. Empty the clean water tank and let dry before storing. Wipe your machine’s exterior with a soft cloth.
• Maintenance: Cleaning the Nozzle: If pet hair or debris become clogged in the nozzle, it can be cleaned out of the nozzle with the nozzle clean out tool. Turn off and unplug the machine from the grounded outlet. Remove the nozzle from the foot: flip the accessory hose door open and lift up on the nozzle and accessory hose door. Hold the nozzle and insert the nozzle clean out tool into the thin slot, on the end of the nozzle that touches the floor. Clean until free of pet hair or debris. Return the nozzle back to the foot of the machine. Line up the three hooks on the nozzle to the bottom of the foot. (see arrows for location) Rotate the nozzle up and click into place. Close the accessory hose door.
• Maintenance: Cleaning the Brush Rolls: Turn off and unplug the machine from the grounded outlet. Lay the machine down on its back or side. Use the comb to brush out the debris or hair from the brush rolls.
• Maintenance: Replacing Belt or Brush Rolls: You will need: 1 Phillips screwdriver & 1 flathead screwdriver. Unplug the machine. Remove both tanks from the machine. Press the recline pedal and lay the machine on its back. Use a flathead screwdriver to help lift and remove the Belt Access Door. Here you should see one (1) belt. This is the Flat Pump Belt. If the Flat Pump Belt is broken, gently remove it from the machine. We will replace this belt in Step 5. Turn the machine on its side. The Power Button should be facing up. Remove the 3 screws on the Belt/Brush Access Plate using a Philips screwdriver. Remove the Access Plate to expose the Brush Cover and Cogged Large Pump Belt. Remove the Brush Cover by lifting straight up. Remove the Cogged Large Pump Belt. The brush rolls can be replaced or cleaned at this time, if needed. Now, if the Flat Pump Belt was broken, place a new Flat Pump Belt around the red area of the large pulley. Then use your thumb to stretch it toward the back of the machine and transfer it onto the metal axle.
• Storing Your Machine Once your cleaning is complete, make sure both the dirty and clean water tanks are emptied, rinsed out, and dried before the next use. Wrap cord around cord wrap for storage. Store machine in a protected, dry area.

Additional Notes

Product Specifications 

• Power Source: Corded
• Power (WATT): 800 watts
• Noise Level: 82 db
• Cleaning Path Width: 30cm
• Clean Tank: 3lt
• Dirty Tank: 1.5lt
• Surface Type: Carpet and Rugs, Low Pile Carpet, Stairs, Carpet, Area Rugs, Pet Beds, Heavy Traffic Areas,
• Large Area, Spot and Stain, Upholstery and Fabric.
• Brush Roll Type/System: 12 Rows Rotating Dirtlifter Powerbrushes
• Cord Length: 7m
• Hose Length: 2.1m
• Edge Cleaning: Yes

Product Dimensions

Warranty

2 Year limited warranty against manufacturing defects.