BISSELL CrossWave Max

Product Care

• Refer to User Guide & Safety Instructions Included
• Maintenance: Unplug from electrical socket when not in use and before cleaning, maintaining or servicing the appliance.
• Empty Dirty Water Tank:
  • 1. To release dirty water tank, press down on recessed button on the top of the dirty tank.
  • 2. Grab the front handle while pressing down on button and pull dirty water tank away from the unit.
  • 3. Grasp top of dirty water tank in recessed areas on each side of the filter and pull upward to remove the top of the tank.
  • 4. To empty, pour dirty water and debris out. Rinse the inside of the dirty water tank.
  • 5. Remove the filter from the dirty water tank top by pulling it up.
  • 6. Hand wash the vacuum filter and screen with warm water and mild detergent.
  • 7. Rinse the float located at the bottom of the dirty water tank’s top.
  • 8. If the inside area where the dirty water tank sits is dirty, wipe it clean with a cloth or towel.
  • 9. Leave parts out to dry.
  • 10. Place vacuum filter back into dirty water tank top.
  • 11. Once parts are dry, reassemble and replace the top of dirty water tank.
  • 12. Angle the dirt tank back into body of machine inserting bottom first. Then tilt the top of the dirt tank toward the machine and push into place until you hear a click.
• NOTE: Your dirty water tank is full when the dirty water reaches the MAX fill line and/or the float shuts off the suction motor.
• Maintenance: Cleaning the Brush Roll and Brush Chamber:
  • 1. Turn off and unplug machine from the grounded outlet.
  • 2. Grasp brush roll window at the front and pull upward to remove.
  • 3. Pull brush roll out by grabbing the brush roll tap and pulling upward.
  • 4. With warm water, rinse your brush roll window and brush roll.
  • 5. If your brush roll chamber is dirty clean with a cloth or towel.
  • 6. Let your brush roll and brush roll window chamber dry before reassembling.
  • 7. Replace brush roll by inserting the brush roll end into the right side of the foot. Then lock the pull tab into place by pressing downward.
  • 8. Replace the brush roll window by first lining up the brush window tabs with the edged of the foot. Then press the window back into place until you hear a click.
• Maintenance: Easy Clean Storage Tray:
  • 1. Place unit on self-cleaning storage tray.
  • 2. Pour water to the max line of the self-cleaning storage tray.
  • 3. Turn the machine on by pressing the Hard Floor Button.
  • 4. Recline the machine while in storage tray. Allow the machine to run for 10-15 seconds until all water is picked up.
  • 5. Unplug the unit.
  • 6. Grasp brush roll window at the front and pull upward to remove.
  • 7. Pull brush roll out by grabbing the brush roll tap and pulling upward.
  • 8. Place brush roll upright in the Brush Roll Drying Tray to dry.
  • 9. Replace brush roll by inserting the brush roll end into the right side of the foot. Then lock the pull tab into place by pressing downward.
  • 10. Replace the brush roll window by first lining up the brush window tabs with the edged of the foot. Then press the window back into place until you hear a click.