BISSELL® PowerEdge® Cordless Stick Vacuum makes vacuuming everyday messes on hard floors and along corners and edges easier. Its thoughtful craftsmanship can be seen in every inch of this machine, starting with the soft, bare floor brush roll that gently and effectively vacuums hard floors. It also has a pair of Edge Cleaning Brushes to sweep up debris that gathers along baseboards and in corners and pull it up into the Easy Empty™ Dirt Tank. The tank’s specially engineered CleanSlide™ Technology gives you control over dust and dander while you empty the tank.

Free Delivery | 7-Day Returns Policy |Warranty: 2 Year limited warranty against manufacturing defects.

1 in stock

Product Notes

  • Motorized Nozzle with Edge Cleaning Brushes & Powerful Suction.
  • Thoughtfully crafted to effectively vacuum hard surfaces and difficult-to-reach areas along baseboards and in corners!
  • 21V Lithium-Ion Battery.
  • Provides up to 30 minutes of cordless cleaning freedom with two cleaning modes to choose from.
  • 1 Machine, 3 Ways to Clean. Converts from a cordless stick vac to a high-reach or handheld vacuum.
  • Maintenance Made Easy. CleanSlide™ Technology gives you control over dust and dander while you empty the Easy Empty™ Dirt Tank.
  • Includes Two Tools & Wall Mount Storage Station. Easily store your machine and the crevice tool and dusting brush all in one place.
  • Multi-Level Filtration.
  • Washable filters help trap dust particles while you clean.
  • Easy Manoeuvrability.
  • Swivel steering lets you move around furniture and other obstacles while you clean.

Product Care

  • Refer to the User Guide & Safety Instructions included
  • Emptying the Dirt Tank:
    • 1. Turn OFF your machine. Remove the Dirt tank from the hand vacuum by pressing the tank release button on the front of the tank.
    • 2. Grab the middle grip of the filter and pull up. This will activate a wiping feature to remove debris from the mesh filter screen. Twisting the grip will remove the filter only.
    • 3. Fully remove the separator from the tank and tap the mesh screen on the side of the trash bin.
    • 4. Dump dirt from the tank into the trash bin.
    • 5. Slide the separator back into the tank, ensuring the notch is seated into the tank correctly.
    • 6. Reattach tank by guiding the bottom into the hook on the hand vacuum. Push into place.
  • Cleaning & Replacing the Filters Pre-Motor Filter
    • 1. For best cleaning performance, always clean your filter after each use. Turn machine OFF. Remove dirt tank by pressing the tank release button and sliding the tank out.
    • 2. Twist top to remove filter frame from the separator. Remove the filter from the filter frame housing. Tap the filter against the side of a trash bin to remove dust and debris.
    • 3. Rinse under warm water and squeeze to remove dirt. Lay out for 24 hours until completely dry. Reinsert filter into the frame with the tag side touching the frame.
  • Cleaning & Replacing the Filters Post-Motor Filter
    • 1. To clean the post-motor filter located on the back of the hand vac, turn OFF machine. Pinch the latch on the filter cover to remove.
    • 2. Press up on the bottom tab to pull filter out.
    • 3. If there’s debris on the filter, tap it on a trash bin and rinse under warm water. Let dry for at least 24 hours before putting it back in the vacuum and replacing the filter cover.
  • Maintaining and replacing your vacuum.
    • 1. Turn the machine OFF and press the foot release button to disconnect the motorized cleaning foot.
    • 2. Use a flathead screwdriver or coin to twist the bottom screws counter-clockwise and release the brush roll side covers.
    • 3. After turning the screws counter-clockwise pull the brush roll cover toward you and remove it from the floor nozzle.
    • 4. Remove the brush roll. Push the end of the brush dowel to the left and lift the brush roll out of the foot.
    • 5. After brush roll is removed clear any debris from the brush, brush housing, and air suction channel.
    • 6. After clearing debris, place the brush roll cover back onto the floor nozzle.
    • 7. Attach and secure brush roll cover by using flathead screwdriver or coin to twist the screws clockwise.
    • 8. Remove debris from brushes and rinse under warm water. Let dry for 24 hours.

Additional Notes

Product Specifications 

  • Power Source: Cordless
  • Battery Type: Lithium-ion
  • Battery Voltage: 21.6 Volt
  • Power (WATT): 54 Watts
  • Noise Level: 80 db
  • Run Time: 30 minutes
  • Charging Time: 5 Hours
  • Cleaning Path Width: 34cm
  • Dirty Tank: 0.4lt
  • Surface Type: Hard Floors (Carpet and Rugs, Low Pile Carpet, Stairs, Carpet, Area Rugs, Bare Floors, Sealed Hard Floors, Pet Beds, Large Area, Sealed Wood Floors)
  • Brush Roll Type/System:
  • Edge Sweep Brushes: Yes
  • Swivel Head
  • Multi-Level Filtration

Product Dimensions

WP Data Tables


There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

SKU LO-B3111G Category